Hand block printing is a way of putting a pattern on cloth by stamping it, repeat by repeat, with a carved wooden block. The block is charged with colour, aligned by eye, and struck down onto stretched fabric. A design that uses more than one colour needs more than one block, each registered to the last. Because a person places every impression, no two lengths come out quite the same.

That is the whole method, and it is also why a hand-blocked tablecloth or wash bag does not look like a roll of mill-printed cotton. The question “what is hand block printing?” is usually asked by someone who has just seen a slight shift in a floral repeat and wants to know whether that is a fault. It is not. It is how the work is done.

The tools

The block is the printing plate. In the workshops around Jaipur it is typically carved from seasoned teak or sheesham (Indian rosewood). The motif sits in relief on the face that meets the cloth. A single pattern is usually a small set of blocks: an outline, often called rekh, and one or more fillers (gadh or datta) for the areas of colour. New blocks are often oiled and left to settle so the grain does not swell once they start meeting wet colour.

Colour sits in a tray, spread on a cloth pad so the block picks up an even film rather than a puddle. The cloth to be printed is washed and prepared, then pinned along a long table, often over a felt padding, so it cannot creep. The printer dips, aligns, and strikes, generally working from left to right. In a multi-colour design, one person may keep to a single block while another follows.

After printing, the cloth is dried — often in the sun — and then finished. Traditional sequences include a steam or a wash to fix the colour, a further drying, and a press. Weather matters. Short winter days and damp air slow the work, and blocks are looked after so they do not warp.

Sanganer and Bagru, just outside Jaipur

Two towns in Jaipur district give their names to the traditions most often mentioned in this craft.

Sanganer, south of the city and close to the airport, is usually recognised by a light ground — white or a very pale cream — and by fine floral work: small sprigs and butis, trailing bel, and net-like jaal patterns. The Chippa community, whose name is related to chhapai, “to print”, has long been associated with the workshops here.

Bagru, a short way west of Jaipur on the Ajmer road, is often described in contrast. The cloth is traditionally treated with harda (myrobalan), a tannin bath that leaves a soft ivory or yellowish ground and helps later colours bind. Motifs tend to be bolder. Bagru is especially known for syahi-begar — iron black and alizarin or madder red — and for dabu, a mud-resist technique. In dabu work, a paste of clay and binders is printed onto the cloth, sometimes dusted with sawdust so it does not smudge, and the cloth is then dyed, often in indigo. When the mud is washed away, the protected shapes remain lighter, sometimes with a fine crackle where the dye crept in.

The two towns are close, and the styles have influenced one another. A modern workshop in Jaipur may work in a light floral manner without calling the cloth “Sanganeri,” or use a darker, earthier palette without a Bagru village label. Knowing the two traditions is still the best way to read what you are looking at.

We do not attach a village label to our own block-print family-name tablecloth. It is hand block-printed in Jaipur, in a sage floral trellis that sits closer to the lighter, garden-like character of Sanganeri work than to a dark indigo dabu ground, and then finished with a family name or initials embroidered in one corner.

Natural dyes, and later colours

Historically both centres worked with plant and mineral colours: indigo, madder, turmeric, pomegranate rind, and a deep black made by fermenting rusted iron with jaggery. Many workshops now also use modern, AZO-free pigments, which are more predictable in a long production and in a first wash at home. Our tablecloth is listed as cotton with natural, AZO-free dyes, in a soft sage rather than the classic red-and-black of syahi-begar.

Whichever colour system is used, a hand-blocked cotton usually benefits from a gentle start: a cold first wash, on its own, and drying in the shade. There is a separate journal note on how to care for block-print cotton.

How to look at a piece

If you are trying to tell a hand block print from a screen print or a machine roller print, look at the repeat rather than at the motif in isolation. A carved block leaves a slight change in pressure from one strike to the next; outlines may meet a little generously, or a little shyly, at the join. A flat, perfectly even field of colour across a long length is more typical of a screen. We have written a fuller comparison in block print vs screen print.

The same printed language also appears, on a smaller scale, in our quilted wash bag, tote and block-print pyjamas. In each case the pattern is printed first; the personalisation is embroidered afterwards.

Hand block printing is not faster than a mill, and it is not trying to be. It is a way of making a useful cloth whose pattern still shows the hand that placed it.